Description
JBL Control 23-1L 3 Ultra-Compact Indoor/Outdoor Background/Foreground Speaker – White (Pair) (Control231L)
The Control 23-1L is a two-way 3 speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 23-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required.
FEATURES
- 3 woofer with woven fiberglass cone
- 1/2 PEI diaphragm tweeter with fluid cooling
- Contemporary, high-design appearance
- Built-in InvisiBall mounting hardware, plus available U-bracket
- Weather resistant enclosure and transducers
- Wide 100 x 100 coverage
- 50 Watt power handling (100 Watt program)
- High fidelity sound character with broad frequency response of 70 Hz 20 kHz
SPECIFICATIONS
- Frequency Range (-10dB)
- 70 Hz to 20 kHz
- Frequency Response (3 dB)
- 95 Hz – 19 kHz
- Power Rating
- 100W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the systems ability to handle normal speech and music program material.
- Maximum Input Voltage
- 17.2 V RMS (2 hrs), 34.4 V peak
- Maximum SPL (1m)
- 103 dB ave. Continuous Pink Noise (109 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
- Sensitivity
- 86 dB, 1W/1m (ave. 100 Hz 10 kHz) *Half-space (on-wall) averaged 100 Hz 10 kHz, 2.83V.
- Coverage Angle
- 100 x 100 *Coverage angle (-6 dB) average between 1.5 kHz and 12 kHz.
- Directivity Factor (Q)
- 5.8 (averaged 1kHz 16kHz)
- Directivity Index (DI)
- 7.2 dB (averaged 1kHz 16kHz)
- Impedance
- 8 ohms
- Crossover Type
- 2nd order low-pass, 2nd order high-pass
- Recommended Protective High-Pass
- 70 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
- Drivers
- LF: 76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
- HF: 13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.
- Enclosure
- High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
- Grille
- Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing.
- Mounting Hardware
- InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
- Outdoor Capability
- IP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments.
- Input Connectors
- Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
- Agency Rating
- ROHS-compliant
- Colors
- white (-WH, RAL9016)
- Dimensions (H x W x D)
- 200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
FAQ
Is warranty coverage available for my product?
Yes! Majority of our product provides a minimum 1 year warranty on the electronic parts.
Can I test the product prior to my purchase?
Definitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you over!
How long will it take to deliver?
It usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!
Can I self-collect my item(s)?
Of course! You can head over to Music Bliss showroom for self-collection during our working hours.
10am – 7.30pm (Mon – Thurs)
10am – 7pm (Fri – Sat)
10am – 6pm (Sun)
Can I use Lalamove / Grab / Same Day Delivery as a delivery option?
Yes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove/Grab service or contact the mainline 016-3111286.
Reviews
There are no reviews yet.